Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the air vent panel (A). (Refer to the BD group - "Crash pad")

3.	Remove the connectors (Hazard lamp connector, incar temperature sensor connector).

4.	Remove the center facia panel (A) after loosening the screws (6EA). (Refer to the BD group - "Crash pad")

5.	Remove the mounting screws (6EA) then remove the audio unit.

Installation

1.	Connect the audio connectors and cable to the audio unit.

2.	Reassemble the audio unit and the center facia panel.

3.	Connector the connectors and reassemble the air vent pannel. - Make sure the audio head unit connectors are plugged in properly. And the antenna cable is connected properly.

4.	Connect the negative (-) battery terminal and then check the audio working.