The ECM (Electro
Chromic inside rear view Mirror) is for dimming the reflecting light from
a vehicle behind at night, in order the user not to be dazzled by the
light. The front looking sensor detects brightness of the surroundings,
while the rearward looking sensor the strength of the reflecting light so
that adjusts the reflexibility of the mirror in the range of 7~85%. But,
when the reverse gear is engaged, it stops functioning.
1. ING
(12V)
2. Reverse gear
signal
3. Ground
| 1. |
The front looking sensor sees if the
brightness of the surroundings is low enough for the mirror to
operate its function. |
| 2. |
The rearward looking sensor detects glaring
of the reflecting light from a vehicle
behind. |
| 3. |
The ECM is darkened to the level as
determined by the rearward looking sensor. When the glaring is no
longer detected, the mirror stops functioning.
|
| Automatic-dimming
Function |
To protect your vision
during nighttime driving, your mirror will automatically dim upon
detecting glare from the vehicles traveling behind you. The auto-dimming
function can be controlled by the Dimming ON/OFF Button :
| 1. |
Pressing and holding the Feature Control
button for more than 3 but less than 6 seconds turns the
auto-dimming function OFF which is indicated by the green Status
Indicator LED turning off. |
| 2. |
Pressing and holding the Feature Control
button again for more than 3 but less than 6 seconds turns the
auto-dimming function ON which is indicated by the green Status
Indicator LED turning on.
|
The mirror defaults to the "ON"
position each time the vehicle is
started. | |
