Master
Switch Inspection
| 1. |
Check the master switch input/output value
by using the diagnostic tool. If the operation of overhead console
door switch is abnormal, check the BCM and
replace. |
| 2. |
When checking the master switch operation,
select a vehicle type and "POWER TAILGATE".
|
| 3. |
Select "CURRENT DATA".
|
| 4. |
Check the PTG power control switch and PTG
switch output value.
|
| 5. |
Confirm that output is changed by the
controlling ON/OFF of each switch on the overhead
console. |
Tailgate
Switch Inspection
| 1. |
Check the power tailgate control module
input/output value by using the diagnostic tool. If the operation of
tailgate module is abnormal, replace power tailgate
switch. |
| 2. |
When checking tailgate switch operation,
select a vehicle type and "POWER TAILGATE" menu.
|
| 3. |
Select the sensor output. And then check the
power tailgate local switch output value changed by the controlling
PTG.
|
| 4. |
If there is no input/output change from OFF
to ON during PTG operation, change the power tailgate
switch. |
Master
Switch
| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Remove the master switch on the lower crash
pad by using the scraper.
|
Tailgate
Switch
| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Open the tailgate and remove the tailgate
trim switch (A) using the appropriate trim tool. And then remove the
connector (B).
|
Master
Switch
| 1. |
Reassemble the master switch on the lower
crash pad after connecting the
connector. |
Tailgate
Switch
| 1. |
Reassemble the tailgate switch on the
tailgate after connecting the
connector. |
