Removal

1.	Remove the rear wheel & tire.

2.	Remove the bolt and nut (A) and then disconnect the trailing arm with the carrier assembly.

3.	Loosen the nut (B) and then disconnect the trailing arm (C) with the cross member.

Inspection

1.	Check the bushing for wear and deterioration.

2.	Check the rear trailing arm for deformation.

3.	Check for all bolts and nuts.

Installation

1.	Connect the rear trailing arm (C) with the cross member and then tighten the nut (B). Tightening torque : 140 ~ 160N.m (14.0 ~ 16.0kgf.m, 101 ~ 116lb-ft)

2.	Connect the trailing arm with the carrier assembly and then tighten the bolt and nut (A). Tightening torque : 140 ~ 160N.m (14.0 ~ 16.0kgf.m, 101 ~ 116lb-ft)

3.	Install the rear wheel & tire. Tightening torque : 90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)