| 1. |
Remove the front wheel &
tire. |
| 2. |
Remove the split pin, bolt, and nut
(A). |
| 3. |
Disconnect the lower arm (B) ball joint with
the knuckle.
|
| 4. |
Loosen the bolts and nut (A, B) and then
remove the lower arm from the sub-frame.
|
| 1. |
Check the bushing for wear and
deterioration. |
| 2. |
Check the lower arm for
deformation. |
| 3. |
Check the all bolts and
nuts. |
| 1. |
Install the front lower arm to the sub-frame
and then tighten the bolts (A, B) and nuts.
Tightening
torque :
140 ~ 160N.m (14.0 ~ 16.0kgf.m, 101 ~
116lb-ft)
|
|
| 2. |
Connect the lower arm (B) ball joint with
the knuckle and then tighten the bolt and nut (A).
Tightening
torque :
100 ~ 120N.m (10.0 ~ 12.0kgf.m, 72 ~
87lb-ft)
| |
| 3. |
Install the split pin to the
bolt.
|
| 4. |
Install the front wheel &
tire.
Tightening
torque :
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~
80lb-ft)
| | |
