Calibration
procedure
If the display read
"C", calibrate the compass.
| 1. |
Driving the vehicle in a circle at less than
8km/h 3 times or until the compass heading
appears. |
| 2. |
Driving in a circle in right-handed
direction and opposite direction are possible, and if the
calibration is completed, the compass heading will
appear. |
| 3. |
Keep driving in a circle until a commpass
heading appears. |
To
adjust the Zone setting :
| 1. |
Determine the desired zone number based upon
your current location on the zone
maps. |
| 2. |
Press and hold the Feature Control button
for more than 6 but less than 9 seconds, the current zone number
will appear on the display (B). |
| 3. |
Pressing and holding the feature control
button (A) again will cause the numbers to increment (Note: they
will repeat …13, 14, 15, 1, 2,..). Releasing the button when the
desired zone number appears on the display will set the new
zone. |
| 4. |
Within about 5 seconds the compass will
start displaying a compass heading
again. |
To
re-calibrate the compass :
There are some
conditions that can cause changes to the vehicle magnets. Items such as
installing a ski rack or a antenna or even some body repair work on the
vehicle can cause changes to the vehicle's magnetic field. In these
situations, the compass will need to be re-calibrated to quickly correct
for these changes.
| 1. |
Press and hold the feature control button
(A) for more than 9 seconds. When the compass memory is cleared, a
"C" will appear in the display (B). |
| 2. |
To calibrate the compass, drive the vehicle
is 2 complete circles at less than 8 KPH (5
MPH). |
Zone
Map
