| 1. |
Remove the windshield wiper arm and blade
(A) after removing a nut.
|
| 2. |
Remove the weather strip and the cowl top
cover (A) after removing 4 retainers.
|
| 3. |
Remove the windshield wiper motor and
linkage assembly after removing 2 bolts. Disconnect the wiper motor
connector and windshield deicer connector from the wiper motor &
linkage assembly.
|
| 1. |
Reassemble the wiper motor & linkage
assembly and connect the connector.
Torque :
7-11Nm (0.7-1.1, kgf.m, 5.0-7.9
lbf.ft)
| |
| 2. |
Push the linkage (A) into the sttoper to set
the wiper blade properly before connecting the
connector.
|
| 3. |
Reassemble the cowl top
cover. |
| 4. |
Reassemble the windshield wiper arm and
blade.
Torque
: 28~32 Nm (2.8~3.2 kgf.m, 20~23.1
lbf.ft)
| |
| 5. |
Install the wiper arm and blade to the
specified position.
Specified position
|
A
|
B
|
Distance [in(mm)]
|
1.02 ± 0.2
(26.0 ± 5
mm)
|
0.98 ± 0.2
(25 ± 5
mm)
|
|
| 6. |
Set the washer nozzle on the specified spray
position.
| |
