Driver
Power Window Switch
| 1. |
When checking the anti pinch strip
operation, select a vehicle type and "BODY CONTROL MODULE"
menu.
|
| 2. |
Select "DRIVER DOOR
MODULE(DDM)".
|
| 3. |
Select option "CURRENT DATA".
|
| 4. |
To check the input value of power window
switch in force mode, select option "ACTUATION TEST".
※ Above voltage and numerical value may be
different from the real value. |
| 5. |
Change the anti pinch strip sensor, if there
is no change from OFF to ON during
operation. |
Assist
Power Window Switch
| 1. |
When checking the Assist Power Window
Switch, select a vehicle type and "BODY CONTROL MODULE"
menu.
|
| 2. |
Select "ASSIST DOOR
MODULE(ADM)".
|
| 3. |
Select option "CURRENT DATA".
|
| 4. |
To check the input value of power window
switch in force mode, select option "ACTUATION TEST".
※ Above voltage and numerical value may be
different from the real value. |
| 5. |
Change the anti pinch strip sensor, if there
is no change from OFF to ON during
operation. |
Rear
Power Window Switch Inspection
| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Remove the rear door trim.
(Refer to the BD group - "Rear
door") |
| 3. |
Disconnect the 8P connector from the
switch.
|
| 4. |
Check for continuity between the terminals
in each switch position according to the table. If the continuity
condition is not normal, replace the switch.
|
