| 1. |
Check the power tailgate control module
input/output value by using the diagnostic tool. If the operation of
tailgate control module is abnormal, replace power
latch. |
| 2. |
To check the power latch operation, select a
vehicle type and "POWER TAILGATE" menu.
|
| 3. |
Select the "CURRENT DATA". And then check
the cinch feedback and unlatch feedback output while operating power
tailgate in power mode.
※ Above voltage and numerical value may be
different from the real value. |
| 4. |
Change the anti pinch strip sensor, if there
is no change during operation. |
| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Remove the tailgate trim (Refer to the BD
group - "Tailgate"). |
| 3. |
Remove the power latch assembly (A) after
removing the nuts (3EA).
|
| 4. |
Remove the connector (B) from the power
latch assembly (C).
| - |
Check the power tailgate for
normal operation. |
| - |
Check the normal operating
whenever a power tailgate component is removed or
replaced. If the chime sound is heard, check the DTC,
wiring harness and cable
connections. | | |
| 1. |
Reassemble the power latch
assembly. |
| 2. |
Connect the connectors and reassemble the
tailgate
trim. | |
