VERACRUZ(EN) >2011 > G 3.8 DOHC > Body Electrical System > Power Door Locks > Power Door Lock Switch>Repair procedures  
Inspection
1.
The DDM inputs can be checked using the scan tool.
2.
To check the input value of door lock switch, select option "BODY CONTROL MODULE".

3.
Select option "DRIVER DOOR MODULE".

4.
Select option "CURRENT DATA".

5.
To check the input value of door lock switch in force mode, select option "ACTUATION TEST".

Removal
Driver Door Lock Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim and power window switch module. (Refer to the BD group - "Front door")

Assist Door Lock Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim and power window switch module. (Refer to the BD group - "Front door")