| 1. |
Preparation
| (1) |
Remove the 2nd seat (Refer to "BD"
group in this SHOP MANUAL). |
| (2) |
Open the carpet for fuel pump
(A).
|
| (3) |
Remove the service cover of the fuel
pump (A).
|
| (4) |
Disconnect the fuel pump connector
(A).
|
| (5) |
Start the engine and wait until fuel
in fuel line is exhausted. |
| (6) |
After engine stops, turn the ignition
switch
off. | |
| 2. |
Disconnect the fuel tank pressure sensor
connector (A).
|
| 3. |
Disconnect the fuel feed tube
quick-connector (B), the suction tube quick-connector (C), and the
vacuum tube quick-connector (D). |
| 4. |
Remove the fuel pump after unfastening the
fuel pump installation bolts (E).
|
| 1. |
Install the fuel pump in according to the
reverse order of "REMOVAL" procedure.
Fuel pump
installation bolts :
2.0 ~ 2.7 N·m (0.2 ~ 0.3 kgf·m, 1.4 ~
2.2 lbf·ft)
| | |
