Relpacement

1.	Discharge refrigerant from refrigeration system.

2.	Replace faulty tube or hose. Cap the open fittings immediately to keep moisture or dirt out of the system.

3.

Tighten joint of bolt or nut to specified torque. Connections should not be torque tighter than the specified torque. Part tightened N.m Kgf.m lbf.ft Condenser - Discharge hose 4.9 ~ 5.9 0.5 ~ 0.6 3.6 ~ 4.3 Condenser - Liquid tube Compressor - Discharge hose 4.9 ~ 5.9 0.5 ~ 0.6 3.6 ~ 4.3 Compressor - Suction hose Expansion valve - Evaporator 11.8 ~ 14.7 1.2 ~ 1.5 8.7 ~ 10.9

4.	Evacuate air in refrigeration system and charge system with refrigerant. Specified amount: Front only : 700 ± 25g (1.54±0.05 lbs) Front & rear : 900 ± 25g (1.98±0.05 lbs)

5.	Inspect for leakage of refrigerant. Using a gas leak detector, check for leakage of refrigerant.

6.	Inspect A/C operation.