VERACRUZ(EN)
>2010 > G 3.8 DOHC > Body Electrical
System > Immobilizer System > Immobilizer
Control Unit>Repair procedures
Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad lower panel(A) after
removing side cover. (Refer to the BD group - "Crash
pad")
3.
Disconnect the 5P connector of the SMARTRA
unit and then remove the SMARTRA unit (A) mounted on the left side
cowl cross bar. after loosening a shear bolt (B).
Installation
1.
Reassemble the SMARTRA unit after connecting
the connector.
