Remove the overhead
console lamp assembly then check for continuity between terminals. If the
continuity is not as specified, replace the map lamp switch.
| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Replace the bulb after removing the
lens. |
| 3. |
Remove the 2 screws, sunroof switch
connectors. And then remove the overhead console (A), lamp
(B).
|
| 1. |
Install the overhead console lamp after
connecting the sunroof switch connector and lamp
connector. |
| 2. |
Install the lens after tightening 2
screws. |
