VERACRUZ(EN) >2010 > G 3.8 DOHC > Body Electrical System > Fuel Filler Door > Fuel Filler Door Release Actuator>Repair procedures
Inspection
1.
Remove the rear seat.
(Refer to the BD group - "Rear seat")
2.
Remove the luggage side trim. (Refer to the internal trim)
3.
Open the fuel filter door and disconnect the wiring connector after loosening 2 nuts.
4.
Check for continuity between terminal No. 1 and No. 2. If there is no continuity replace the fuel filler door release actuator (A).
