Check it by the
procedure below to see if the function of the ECM is normal.
| 1. |
Turn the ignition key to the "ON"
position. |
| 2. |
Cover the front looking sensor to stop
functioning. |
| 3. |
Head a light to the rearward looking
sensor. |
| 4. |
The ECM should be darkened as soon as the
rearward looking sensor detects the light.
|
If this test is performed in daytime,
the ECM may be darkened as soon as the front looking sensor is
covered. | |
| 5. |
When the reverse gear is engaged, the ECM
should not be darkened.
When heading lights to both the front looking
and rearward looking sensors, the ECM should not be
darkened. |
| 1. |
Disconnect the mirror connector(A) after
removing the mirror wire cover and a screw.
|
| 2. |
Remove the mirror making sure the mounting
bracket not to be damaged. |
| 1. |
Reassemble the
mirror. |
| 2. |
Reassemble the connector, screw and wire
cover. |
