VERACRUZ(EN) >2009 > G 3.8 DOHC > Fuel System > Fuel Delivery System > Accelerator Pedal>Repair procedures
Removal
1.
Turn the ignition switch off and disconnect the battery (-) cable from the battery.
2.
Disconnect the accelerator position sensor connector (A).
3.
Unfasten the mounting nuts (B) and remove the accelerator pedal from the vehicle.
Installation
1.
Install the accelerator pedal in according to the reverse order of "REMOVAL" procedure.
Accelerator pedal mounting nuts:
8.8 ~ 13.7N·m (0.9 ~ 1.4kgf·m, 6.5 ~ 10.1lbf·ft)
