VERACRUZ(EN) >2008 > G 3.8 DOHC > Automatic Transaxle System > Automatic Transaxle Control System > Output Speed Sensor>Description and Operation (F21)  
Description
The output speed sensor (SP) is installed in the transaxle case.
This sensor detects the number of revolutions of the counter drive gear as output shaft speed.
This signal is transmitted to the TCU. Based on those signals, the TCU controls engine torque, shift timing, and lock-up.

Specification

 Signal
 Current
Output speed sensor
 HIGH
 12-16 mA
LOW
 4-8 mA