Restraint > General Information

COMPONENT REPLACEMENT AFTER DEPLOYMENT

Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.

When the front airbag(s) deployed after a collision, replace the following items.

SRSCM

-	Deployed airbag(s)

-	Deployed seat belt pretensioner(s)

-	Front impact sensors

-	SRS wiring harnesses

-	Inspect the clock spring for heat damage. If any damage found, replace the clock spring.

When the seat belt pretensioner(s) deployed after a collision, replace the following items.

-	Deployed seat belt pretensioner(s)

SRSCM

-	Front impact sensors

-	SRS wiring harnesses

When the side/curtain airbag(s) deployed after a collision, replace the following items.

SRSCM

-	Deployed airbag(s)

-	Side impact sensor(s) for the deployed side(s)

-	SRS wiring harnesses

After the vehicle is completely repaired, confirm the SRS airbag system is OK.

-	Turn the ignition switch ON, the SRS indicator should come on for about 6 seconds and then go off.