| BRAKE PEDAL HEIGHT AND FREE PLAY
ADJUSTMENT |
| 1. |
Disconnect the stop lamp switch connector (A)
and loosen the stop lamp switch lock nut.
|
| 2. |
Adjust the brake pedal height (A) as
illustration below.
Pedal height
Common pedal : 210.4 mm (8.28
in)
Adjustable pedal : 210.4 mm (8.28
in)
|
|
| 3. |
Adjust the stop lamp switch clearance (A) and
brake pedal free play.
Stop lamp clearance: 1.0 ~ 2.0 mm (0.04
~ 0.08 in)
Pedal free play: 3.0 ~ 8.0 mm (0.12 ~
0.31 in)
|
|
Adjust the brake pedal free play using
the stop lamp switch lock
nut. | |
| 1. |
Remove the lower crash pad. (Refer to BD
Gr.) |
| 2. |
Disconnect the stop lamp switch connector
(A).
|
| 3. |
Remove the mounting bracket bolts
(B).
Tightening
torque Nm (kgf.m, lb-ft):
16.7 ~ 25.5 (1.7 ~ 2.6, 12.3 ~
18.8)
| |
| 4. |
Remove the snap pin (A) and joint pin
(B).
|
| 5. |
Remove the brake pedal member assembly
mounting nuts (C) and then remove the brake pedal
assembly.
Tightening
torque Nm (kgf.m, lb-ft):
16.7 ~ 25.5 (1.7 ~ 2.6, 12.3 ~
18.8)
| |
| 1. |
Installation is the reverse of
removal.
| •
|
Before installing the pin, apply
the grease to the joint
pin. |
| •
|
Use a new snap pin whenever
installing. | | |
| 2. |
Check the brake pedal
operation. | |
