| 1. |
Remove the wheel & tire.
|
| 2. |
Remove the brake hose clip (A).
|
| 3. |
Disconnect the brake tube by loosening the
tube flare nut (A).
Tightening
torque Nm (kgf.m, lb-ft):
12.7 ~ 16.7 (1.3 ~ 1.7, 9.4 ~
12.3)
|
|
| 4. |
Disconnect the brake hose (A) from the brake
caliper by loosening the bolt.
Tightening
torque Nm (kgf.m, lb-ft):
16.7 ~ 19.6 (1.7 ~ 2.0, 12.3 ~
14.5)
|
|
| 1. |
Installation is the reverse of
removal.
|
Use a new washer (A) whenever
installing. |
|
| 2. |
After installation, bleed the brake system
(Refer to Brake system bleeding) |
| 1. |
Check the brake tubes for cracks, crimps and
corrosion. |
| 2. |
Check the brake hoses for cracks, damage and
fluid leakage. |
| 3. |
Check the brake tube flare nuts for damage and
fluid
leakage. | |
