| 1. |
Preparation
| (1) |
Remove the 2nd seat (Refer to "BD" group
in this SHOP MANUAL). |
| (2) |
Open the carpet for fuel pump
(A).
|
| (3) |
Remove the service cover of the fuel
pump (A).
|
| (4) |
Disconnect the fuel pump connector
(A).
|
| (5) |
Start the engine and wait until fuel in
fuel line is exhausted. |
| (6) |
After engine stops, turn the ignition
switch
off. | |
| 2. |
Open the carpet of the sub fuel sender
(A).
|
| 3. |
Disconnect the sub fuel sender connector (A)
and the suction tube quick-connector (B)
|
| 4. |
Remove the sub fuel sender from the fuel tank
after unfastening the sub fuel sender installation bolts
(C).
|
| 1. |
Install the sub fuel sender in according to
the reverse order of "REMOVAL" procedure.
Sub fuel sender installation bolts : 2.0
~ 2.9N·m (0.2 ~ 0.3kgf·m, 1.4 ~ 2.2lbf·ft)
| | |
