VERACRUZ(EN) >2007 > G 3.8 DOHC > Emission Control System > Crankcase Emission Control System > Positive Crankcase Ventilation (PCV) Valve>Repair procedures  
REMOVAL
1.
Remove the valve pad (A) and disconnect the vacuum hose (B).

2.
Remove the PCV vavle.
INSTALLATION
Install the PCV valve and tighten to the specified torque.
PCV Valve installation : 7.8 ~ 11.8 N·m (0.8 ~ 1.2 kgf·m, 5.8 ~ 8.7lbf·ft)
INSPECTION
1.
Remove the PCV valve.
2.
Insert a thin stick(A) into the PCV valve(B) from the threaded side to check that the plunger moves.
3.
If the plunger does not move, the PCV valve is clogged. Clean it or replace.