VERACRUZ(EN) >2007 > G 3.8 DOHC > Suspension System > Rear Suspension System > Trailing Arm>Repair procedures  
REMOVAL
1.
Remove the rear wheel & tire.
2.
Remove the bolt and nut (A) and then disconnect the trailing arm with the carrier assembly.
3.
Loosen the nut (B) and then disconnect the trailing arm (C) with the cross member.

INSTALLATION
1.
Connect the rear trailing arm (C) with the cross member and then tighten the nut (B).
Tightening torque Nm (kgf.m, lb-ft):
140 ~ 160 (14.0 ~ 16.0, 101 ~ 116)
2.
Connect the trailing arm with the carrier assembly and then tighten the bolt and nut (A).
Tightening torque Nm (kgf.m, lb-ft):
140 ~ 160 (14.0 ~ 16.0, 101 ~ 116)

3.
Install the rear wheel & tire.
Tightening torque Nm (kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~ 80)
INSPECTION
1.
Check the bushing for wear and deterioration.
2.
Check the rear trailing arm for deformation.
3.
Check for all bolts and nuts.