VERACRUZ(EN) >2007 > G 3.8 DOHC > Body Electrical System > Audio > Speakers>Repair procedures  
REMOVAL
FRONT SPEAKER
1.
Remove the front door trim.
(Refer to the Body group - Front door).
2.
Remove the front speaker (A) after removing 4 rivets.

REAR SPEAKER
1.
Remove the rear door trim.
(Refer to the Body group - Rear door).
2.
Remove the rear speaker (A) after removing 4 rivets.

CRASH PAD CENTER SPEAKER
1.
Remove the crash pad center center speaker grill (A).

2.
Remove the crash pad center speaker (A) after loosening the 2 mounting screws.

EXTERNAL AMPLIFIER
1.
Remove the left luggage side trim.
(Refer to the Body group - Rear seats)
2.
Remove the external amplifier (A) removing the bolts and nuts.

TWEETER SPEAKER
1.
Remove the front door delta cover (A).
(Refer to the Body group - Front door).

2.
Remove the tweeter speaker (A) after loosening 2 screws and disconnecting the connector.

WOOFER SPEAKER
1.
Remove the left luggage side trim.
(Refer to the Body group - Rear seats).
2.
Remove the woofer speaker (A) after removing 5 bolts and disconnecting the connector.

INSTALLATION
CRASH PAD CENTER SPEAKER
1.
Reassemble the crash pad center speaker after connecting the connector.
2.
Reassemble the crash pad center speaker grill.
EXTERNAL AMPLIFIER
1.
Reassemble the external amplifier after connecting the connector.
2.
Reassemble the left luggage side trim.
TWEETER SPEAKER
1.
Reassemble the tweeter speaker after connecting the connector.
2.
Reassemble the front door delta cover.
WOOFER SPEAKER
1.
Reassemble the woofer speaker after connecting the connector.
2.
Reassemble the left luggage side trim.
INSPECTION
1.
Check the speaker with an ohmmeter. If an ohmmeter indicates the correct impedance of the speaker when checking between the speaker (+) and speaker (-) of the same channel, the speaker is ok.
Specified impedance : 2~4 Ω