REMOVAL

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front bumper cover.

3.	Remove the front fog lamp assembly after loosening screws (4EA).

INSTALLATION

1.	Install the front fog lamp bulb.

2.	Connect the front fog lamp connector.

3.	Install the front bumper cover.

INSPECTION

1.	Pull out the front fog lamp (A) relay from the engine compartment relay box.

2.	Check for continuity between terminals. There should be continuity between the No.87 and No.30 terminals when power and ground are connected to the No.85 and No.86 terminals.

3.	There should be no continuity between the No.87 and No.30 terminals when power is disconnected.