VERACRUZ(EN) >2007 > G 3.8 DOHC > Body Electrical System > Rear Wiper/Washer > Rear Washer Motor>Repair procedures
INSPECTION
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
2.
Remove the front bumper cover. (Refer to the Body group- Front bumper)
3.
Connect positive (+) and negative (-) battery cables to terminals 3 and 2 respectively to see that the washer motor runs and water is pumped.
4.
Check that the motor operates normally.
Replace the motor if it operates abnormally.
